Echelon/NES Smart Meters – the beginning

Echelon logo

This will be a multi part post as we spent the last year in collecting all the pieces of the puzzle to connect to and get data from our Echelon Type 83331-3IAAD meter. Like others trying to do this, we hit a lot of “red tape”, lack of knowledge from involved partners, confusions and even deliberate mis-information. But in the end we actually succeeded and now have all the pieces to complete the puzzle. We are working on finalizing a tinker solution, but are still under a NDA (Non-Disclosure Agreement from the current technology owner NES (Networked Energy Services). Luckily NES is working hard on releasing the required information as open source through OSGP Alliance (OSGP is short of Open Smart Grid Protocol). We have been promised this will happen “soon” (and have received drafts of the documents – so we are pretty sure it will happen soon). This is the start of the process that hopefully will make it possible to share the knowledge with you.

Shoutout to the guys and girls at the just finished sommerhack.dk: Thank for a great gathering and for listening to our Echelon stories… And an additional shoutout to Georg Sluyterman, who is running BefriDinElmåler.dk and is beta-testing our prototype in his Echelon Power Meter.


For a few years Graves and Gert have been trying to create a solution to read out our power consumption from our so-called Smart Meter: Echelon Type 83331-3IAAD.

Initially we hoped to be able to read the meter data through the IR (Infra Red) “eye” on the meter. This seems to be possible on meters from other manufacturers, (i.e. Kamstrup) and HAL9K even shared the required hardware for it.

We spent quite some time on this “rabbit hole”, but eventually found internet sources mentioning this interface is encrypted and you need to obtain a key from your power network provider to decrypt this interface on our Echelon meter. It seems this interface is used during production of the meter and have a bunch of features. Unfortunately our guess is also that the security of this port has been compromised as our power network provider N1 simply refuses to hand over the required keys. We have not found any real evidence of this, but if you have any information regarding this, please enlighten us in the comments :-).

At this point in time we reached out to our power company, which referred us to N1. We started pushing N1 for information on how to integrate with the meter (as you are supposed to be able to do this by law) and keys for the IR port, but is seemed like a dead end. Others have tried with no success – and we did expect kind of the same result… We thought that the guys at N1 withheld information from us on purpose… Today we know it is more likely they simply did not have much usable information and only knew that they would/could not hand out the IR encryption keys.

The obvious next step was to start counting the LEDs blinking on the meter. Other have successfully implemented this very simple interface, and we know it is possible to follow the power consumption by counting the LED blinks, and maybe even get the real time consumption by measuring the blinking frequency. Although this will work and we also went down this path for a while, it is not really a nice solution. You cannot read the exact counter shown on the meter and get other available information etc.

During our research we also found that our power network provider (N1) at least at some point might have offered an electrical interface pulsing the same way as the LED. Apparently you had to rent it for a monthly fee… In other words, not for tinkeres like us….

The ironic part is that the meter in fact have screw terminals for different interfaces (M-Bus and something called “MEP” – we’ll discuss that in our next post), but on our meter they are hidden behind a protected/sealed cover. And you are NOT allowed to break the seals in any way. It is simply illegal for consumers to do that in Denmark.

At this point in time we kind of gave up… Apparently it is not possible to get to the meter data in a real usable/electronic way. And N1 is not providing much help….

…or rather – we gave up for a while – stay tuned for our next post :-)…

Echelon/NES Smart Meters – dabbler.dk rebooted

We have been quiet for a while. Not because we have not been tinkering, but because we’ve been very busy tinkering.

To be precise we’ve been tinkering with our Echelon type 83331-3IAAD Smart Meters (power meters) and how to read out the consumption in a nice way…

Echelon type 83331-3IAAD Smart Meters (power meter)

At the Danish gathering Sommerhack.dk 2021 we’ll be presenting a session (Friday @ 16:00 CET) about our process and the current state of this project. See you there?

It is yet to be determined how much details we can share because we are currently under NDA (Non-Disclosure Agreement) with the product owner NES (Networked Energy Services) about the details… But that will hopefully change soon.

Are you interested in communicating with your Echelon Smart Meter?

Stay tuned for more info. on how to do it… coming to dabbler.dk very soon now…

Game On – or Game Over?

ALTris app logo

A few weeks ago Erik Hougaard challenged me (or I challenged myself?) in comments on one of Erik’s YouTube videos to re-implement my C5Tris game for Microsoft Dynamics C5 in AL for Microsoft Dynamics 365 Business Central (BC).

Off cause BC supports Java Script control add ins, but downloading a Java Script Tetris clone and simply calling it in a BC JavaScript control add in would not really be a challenge at all.

The true nature of the challenge must be to create a playable Tetris clone in AL, controlled by AL and only use a minimum amount of HTML and Java Script.

On top of that the game should probably be implemented with very few AL objects, to limit the footprint when installing. And why not add controls with the cursor keys and game sound effects now we are busy anyway?

Challenge accepted!

In this link you will find a ZIP-file with the source code, but if you just want to install the app in your BC, you can just download the app file here!

If you just want to see it – well here we go (disclaimer: I’m a developer, NOT a gamer!)

ALTris was developed in BC14, but as BC apps are compatible with other versions it should be installable and playable on other versions too. It probably also helps that I’m not using a bunch of calls to the standard BC base application. I didn’t find any usable – probably Microsoft didn’t think of BC as much of a games platform :-).

Feel free to use the code, look into the code, change the code, complain about the code or whatever you prefer as long as you keep my name, SIMTEQ A/S and links to my LinkedIn and SIMTEQs homepage in there.

Use this code on your own risk and costs…. and enjoy!

Updates:
* 2020-09-08: Found and fixed a few spell bugs (text only), so we are now at version 1.0.0.1 🙂

No online help in Microsoft Dynamics Business Central 2019 wave 1 (aka BC14) On-Premises

Dynanmics 365 Business Central logo

Did you also wonder where the English and Danish (and probably other languages as well) help pages went?

In Microsoft Dynamics Business Central 2019 wave 1 aka Business Central 14 (and possible newer versions) after the RTM-release in April 2019, the help simply does not work out-of-the-box anymore.

It seems Microsoft are more focused on the SaaS solution these days and the On-Premise version is suffering a bit from it.

Note: I’ve actually contacted Microsoft about these help issues, but due to the SaaS focus and the help beeing a community effort now (see https://docs.microsoft.com/en-us/dynamics365/business-central/dev-itpro/help/contributor-guide), they are actually NOT planning to fix this! Also they are trying to reduce the size of the install DVD.
That is an unofficial answer though, so if we all report it, they might change their minds :-). For now this is something you need to repair in your installation yourself – i.e. by following this blog post…

This is actually two “errors”:

(1) If you have selected the en-US language and you try to open the help using the icon or CTRL+F1 you get this:

Server Error in '/' Application.
Runtime Error
Server Error in ‘/’ Application. – Runtime Error

…actually this is quite easily fixed. The English language is per default installed in “C:\inetpub\wwwroot\DynamicsNAV140Help\help\en”, but BC is trying to open it from “C:\inetpub\wwwroot\DynamicsNAV140Help\help\en-US”. So let us just create a link:

C:>cd C:\inetpub\wwwroot\DynamicsNAV140Help\help

C:\inetpub\wwwroot\DynamicsNAV140Help\help>mklink /d en-US en
symbolic link created for en-US <<===>> en

C:\inetpub\wwwroot\DynamicsNAV140Help\help>dir
Volume in drive C has no label.
Volume Serial Number is C6AF-373F
Directory of C:\inetpub\wwwroot\DynamicsNAV140Help\help
06/23/2020 07:03 AM
.
06/23/2020 07:03 AM ..
03/30/2020 10:53 AM da-DK
03/30/2020 10:53 AM en
06/23/2020 07:03 AM en-US [en]
01/31/2020 07:11 AM 22,060 feedback.js
03/30/2020 10:53 AM local
01/31/2020 07:11 AM 79 shortcutCold.gif
2 File(s) 22,139 bytes

…problem solved 🙂

2020-10-05 GL: Please see Jani Kivilähde’s comment below: “For fix (1), the use of SYMLINK breaks the search in Help Server. Windows Search does not traverse SYMLINKs.”. So the correct fix is – as mentioned by Jani – to rename or copy the folder.

(2) If you on the other hand have selected the da-DK (Danish) language – or presumable any other language besides en-US, you’ll get this error:

404 - File or directory not found.
404 – File or directory not found.

…and if you have a look at the server in the destination folder “C:\inetpub\wwwroot\DynamicsNAV140Help\help\da-DK”, you’ll discover why:

Slim da-DK help (missing files)
Slim da-DK help (missing files)

Actually, I’ve checked most versions of the Danish install DVD, an the .cab-file with help files are only included in full on the RTM version – NOT in all the CU versions (you’ll find the .cab-file on the DVD in the folder “Installers\DK\WebHelp\DynamicsNAV140Help\help\da-DK”). In the RTM-version the .cab-file is above 4MB in file size, while it is only 18KB on the CU versions.

So this solution is – either build your own html-files from the GitHub repository mentioned in the link I mentioned in the beginning of this post (https://docs.microsoft.com/en-us/dynamics365/business-central/dev-itpro/help/contributor-guide), or (preferable) download and copy the files from the RTM DVD.

Note: The latter solution is probably the preferred one, because you then get the exact help files matching your BC version. The GitHub repository might contain functionality not yet introduced in your major version.

Another note: the .cab-file or “Cabinet File” is actually a .zip-file, so you can rename it to .zip to open it in Windows or simply open it with 7-Zip or similar archiving utility. And then copy the contents to the correct language help folder.

Yet another note: In the “old days” where this worked out-of-the-box, the translated help files was typically NOT updated with each CU release. That makes sense as CUs rarely contains a lot of new functionality and it is probably quite expensive to keep the translations updated.

And a final note: I’ve not confirmed this issue for Microsoft Business Central 2019 wave 2 aka BC15 and/or 2020 wave 1 aka BC16. But as this might be caused by Microsoft prioritizing SaaS, it might be the same story in all versions after BC14. Hopefully we will be able to extract the help from the RTM versions…

As always: These fixes comes with NO warranty. Use this completely at your own risk and costs. Also it would probably be a very good idea to make a copy of the existing installation before overwriting or adding anything.

Extra hint – can you search in your help? If not, did you remember to:

  • enable Windows Search on your IIS help server (WindowsServer Manager)
  • verify that the Windows Indexing Service is running (Windows Task Manager)
  • verify the help folder is included in the indexing (Windows Control Panel)

Running Microsoft SQL Server 2019 Developer Edition in a Docker Windows Container

Note: This work is based on the “Official Microsoft repository for SQL Server in Docker resources” found here: https://github.com/microsoft/mssql-docker/tree/master/windows/mssql-server-windows-developer

Unfortunately this has not been updated to run Windows ServerCore 1890 and Microsoft SQL Server 2019 – so this is what this blog post is about…

Note 2: We are only taking about minor changes here – so I’m not in ANY way trying to claim credits for these scripts – all credits goes to the original author for these scripts – see the above mentioned official link!

Note 3: If you try to use the official Microsoft SQL Server Developer Edition image and you get the error “The container operating system does not match the host operating system.”, it is probably because that image is not Windows Server 1809 compatible. This will also solve that as this image is based on the “mcr.microsoft.com/windows/servercore:1809” Windows Server image.

Enough notes for now :-). Let’s roll with this – first you need to create these two files:

“dockerfile”:

# 2020-05-11 GL
#
FROM mcr.microsoft.com/windows/servercore:1809

LABEL maintainer "Gert Lynge"

# Download Links:
ENV exe "https://download.microsoft.com/download/7/c/1/7c14e92e-bdcb-4f89-b7cf-93543e7112d1/SQLServer2019-DEV-x64-ENU.exe"
ENV box "https://download.microsoft.com/download/7/c/1/7c14e92e-bdcb-4f89-b7cf-93543e7112d1/SQLServer2019-DEV-x64-ENU.box"

ENV sa_password="_" \
    attach_dbs="[]" \
    ACCEPT_EULA="_" \
    sa_password_path="C:\ProgramData\Docker\secrets\sa-password"

SHELL ["powershell", "-Command", "$ErrorActionPreference = 'Stop'; $ProgressPreference = 'SilentlyContinue';"]

# make install files accessible
COPY start.ps1 /
WORKDIR /

RUN Invoke-WebRequest -Uri $env:box -OutFile SQL.box ; \
        Invoke-WebRequest -Uri $env:exe -OutFile SQL.exe ; \
        Start-Process -Wait -FilePath .\SQL.exe -ArgumentList /qs, /x:setup ; \
        .\setup\setup.exe /q /ACTION=Install /INSTANCENAME=MSSQLSERVER /FEATURES=SQLEngine /UPDATEENABLED=1 /SQLSVCACCOUNT='NT AUTHORITY\NETWORK SERVICE' /SQLSYSADMINACCOUNTS='BUILTIN\ADMINISTRATORS' /TCPENABLED=1 /NPENABLED=0 /IACCEPTSQLSERVERLICENSETERMS /SQLMAXDOP=1 /SQLBACKUPDIR='C:\Server\MSSQL\Backup' /SQLUSERDBDIR='C:\Server\MSSQL\DB' /SQLUSERDBLOGDIR='C:\Server\MSSQL\DB' ; \
        Remove-Item -Recurse -Force SQL.exe, SQL.box, setup

RUN stop-service MSSQLSERVER ; \
        set-itemproperty -path 'HKLM:\software\microsoft\microsoft sql server\mssql15.MSSQLSERVER\mssqlserver\supersocketnetlib\tcp\ipall' -name tcpdynamicports -value '' ; \
        set-itemproperty -path 'HKLM:\software\microsoft\microsoft sql server\mssql15.MSSQLSERVER\mssqlserver\supersocketnetlib\tcp\ipall' -name tcpport -value 1433 ; \
        set-itemproperty -path 'HKLM:\software\microsoft\microsoft sql server\mssql15.MSSQLSERVER\mssqlserver\' -name LoginMode -value 2 ;

HEALTHCHECK CMD [ "sqlcmd", "-Q", "select 1" ]

CMD .\start -sa_password $env:sa_password -ACCEPT_EULA $env:ACCEPT_EULA -attach_dbs \"$env:attach_dbs\" -Verbose

…and “start.ps1”

# 2020-05-11 GL

# The script sets the sa password and start the SQL Service
# Also it attaches additional database from the disk
# The format for attach_dbs

param(
[Parameter(Mandatory=$false)]
[string]$sa_password,

[Parameter(Mandatory=$false)]
[string]$ACCEPT_EULA,

[Parameter(Mandatory=$false)]
[string]$attach_dbs
)

if($ACCEPT_EULA -ne "Y" -And $ACCEPT_EULA -ne "y")
{
	Write-Verbose "ERROR: You must accept the End User License Agreement before this container can start."
	Write-Verbose "Set the environment variable ACCEPT_EULA to 'Y' if you accept the agreement."

    exit 1
}

# start the service
Write-Verbose "Starting SQL Server"
start-service MSSQLSERVER

if($sa_password -eq "_") {
    if (Test-Path $env:sa_password_path) {
        $sa_password = Get-Content -Raw $secretPath
    }
    else {
        Write-Verbose "WARN: Using default SA password, secret file not found at: $secretPath"
    }
}

if($sa_password -ne "_")
{
    Write-Verbose "Changing SA login credentials"
    $sqlcmd = "ALTER LOGIN sa with password=" +"'" + $sa_password + "'" + ";ALTER LOGIN sa ENABLE;"
    & sqlcmd -Q $sqlcmd
}

$attach_dbs_cleaned = $attach_dbs.TrimStart('\\').TrimEnd('\\')

$dbs = $attach_dbs_cleaned | ConvertFrom-Json

if ($null -ne $dbs -And $dbs.Length -gt 0)
{
    Write-Verbose "Attaching $($dbs.Length) database(s)"
	    
    Foreach($db in $dbs) 
    {            
        $files = @();
        Foreach($file in $db.dbFiles)
        {
            $files += "(FILENAME = N'$($file)')";           
        }

        $files = $files -join ","
        $sqlcmd = "IF EXISTS (SELECT 1 FROM SYS.DATABASES WHERE NAME = '" + $($db.dbName) + "') BEGIN EXEC sp_detach_db [$($db.dbName)] END;CREATE DATABASE [$($db.dbName)] ON $($files) FOR ATTACH;"

        Write-Verbose "Invoke-Sqlcmd -Query $($sqlcmd)"
        & sqlcmd -Q $sqlcmd
	}
}

Write-Verbose "Started SQL Server."

$lastCheck = (Get-Date).AddSeconds(-2) 
while ($true) 
{ 
    Get-EventLog -LogName Application -Source "MSSQL*" -After $lastCheck | Select-Object TimeGenerated, EntryType, Message	 
    $lastCheck = Get-Date 
    Start-Sleep -Seconds 2 
}

…and then you have to run these docker commands (replace “<path to a directory with the above mentioned two files>” with the path to the above mentioned two files: dockerfile and start.ps1 – and “<password>” with the sa-password you want):

docker build --memory 4g --tag dabbler/mssql-server-windows-developer:winsrv1809-sql2019 "<path to a directory with the above mentioned two files>" 

docker run --name SQLServer2019 -e ACCEPT_EULA=Y -e sa_password=<password> -p 1433:1433 -d dabbler/mssql-server-windows-developer:winsrv1809-sql2019

If you are lucky, you will now have a running SQL Server 2019 Developer Edition and you can connect directly to it with Microsoft SQL Server Management Studio directly on the host running Docker (use “SQL Server Authentication” with host: “localhost”, login: “sa” and the password stated above).

Installing Microsoft Dynamics 365 Business Central with AzureSQL

Dynanmics 365 Business Central logo

As described here, it can be kind of a Catch-22 to try to install Microsoft Dynamics 365 Business Central if you don’t have a local SQL Server, but want to use AzureSQL.

Although I know the approach in the before mentioned Kine Info blog post works, I came across a easier solution during my struggles with this issue.

Although the installer setup.exe does not have a “Postpone Server Startup” setting in the GUI, it actually support it.

You just need to create a configuration and hit Save before actually starting the installation. You can do that when you finish filling out all the settings on the setting page (the one with port numbers, database server and database name etc.). After you saved the configuration, close the setup.exe installer.

Now open the XML file you saved, locate the “PostponeServerStartup” setting and change it’s default value of “false” to “true”:

<Parameter ID="PostponeServerStartup" Value="true"/>

Now restart setup.exe and load the configuration – and start the installation. The installer will not try to start the service tier, so it won’t fail that and roll back the installation.

We can only hope that Microsoft at some point will add this option to the setup.exe GUI :-).

2020-02-28 Update: I’ve suggested it to Microsoft. It is not a high priority issue (because of the above described workaround). For anybody interested it has been logged with internal Microsoft ID 346773.

Review: Introduction to the Modern client

Introduction to the Modern client

“Introduction to the Modern client” is a comprehensive, well written and excellent book for readers wanting an introduction to the new Modern client for Microsoft Dynamics 365 Business Central.

Peik Bech-Andersen not only introduces the Modern client and its role centers. He also walks us through the different elements of a role center and give us an easy to understand overview of the considerations, possibilities and tasks in adjusting the role center to the different requirements of a company, a department or even for an individual user.

Throughout the book Peik gives valuable hints and describes the complete life of role center and profile adjustments – starting from a developers tasks in adding parts to a role center page, via consultants and super users possibility to add or hide parts of a profile and he finishes off with the personalization options for individual users.

In the book you get information regarding best practices and unique bonus information about various subjects including notifications and utilizing/re-using the build in Business Charts – all based on Peik’s longstanding experience as a solution architect.

Peik’s full circle on the Modern client, role centers and profiles give “Introduction to the Moderns client” a very wide target audience.

I have no problems in recommending this book to readers ranging all the way from new Microsoft Dynamics 365 Business Central users (e.g. as course material), over experienced NAV users, super-users and consultants, to skilled NAV developers with the need to get familiar with the new Modern client and identifying when they need to add to the role centers and when to let the consultants handle it.

You can buy the two books at the Dynamics Book Store:

Introduction to the Modern client as PDF download
Introduction to the Modern client as paperback

The task cannot be run because the user account that is assigned to run the task has been altered

Microsoft Dynamics NAV logo

Have you tried to rename a company (from the Companies page or from PowerShell (Rename-NAVCompany cmdlet) in Microsoft Dynamics NAV 2018 and you get this error: “The task cannot be run because the user account that is assigned to run the task has been altered”, you are hit by a side effect of a new Service Tier Setting.

A quick google of the error message yields a few results – especially this one: https://forum.mibuso.com/discussion/72652/job-queue-with-task-scheduler-and-user-id… which suggest that it has something to do with the Service Tier Setting “EnableUserConsistencyValidationOnTasks”.

If we look at Microsoft description of that Service Tier Setting at https://docs.microsoft.com/en-us/dynamics365/business-central/dev-itpro/administration/configure-server-instance, we see this description:

Specifies whether user consistency checks are done on tasks. Setting this to true helps guard against impersonation of users in tasks. When enabled, only the user who created the task can edit the task. If a task is edited by different user account, an error similar to the following occurs: The task cannot be run because the user account that is assigned to run the task has been altered. The task has been canceled.

Default: true

Dynamically Updatable: No

…so if this protection is not important to you – you can easily work around the error by setting this key to false. If this protection is important to you, you should off cause just set it to false while renaming the company and then set it back to true again.

Have a Merry Christmas and a Happy New Year!

2 + 2 <> 4

Microsoft Dynamics C5 logo

In the past I worked a lot with Microsoft Dynamics C5 and I just stumbled across an old quirk when you add database to a large existing database. You simply does not always get what you pay for.

Registered Microsoft Dynamics C5 partners can find this information in Danish on PartnerSource following this link: https://mbs.microsoft.com/partnersource/denmark/pricing-ordering/pricing-ordering-news/C52012DatabaseIntervalsExplained

…but the rest of you can get part of it here :-).

For Microsoft Dynamics C5 you purchase additional database in packages of these sizes: +25MB, +125MB, +250MB, +500MB and +2,500MB. Unfortunately internally the Microsoft Dynamics C5 kernel and license codes handles additional database size like this:

Database intervalIncrementsNotes
0 – 45MB+5MB45MB is included in the initial Microsoft Dynamics C5 license
45 – 120MB+5MB
120 – 2,020MB+25MB
2,020 – 12,020MB+100MB
12,020 – 112,020MB+1,000MB

This actually means that if you have a database of 2,020MB and purchases +25MB, Microsoft Dynamics C5 will state the available space as 2,120MB, while your license states only 2,045MB.

Actually – according to the above mentioned information link to PartnerSource, you are NOT allowed to use more database than the license states. So you should add an extra database package when you reach 2,045MB in the above example.

If you don’t do that, this will also cause some huge confusion when you reach 2,120MB – because you might then add another +25MB and you’ll get NOTHING. The license will say 2,070MB, but Microsoft Dynamics C5 will still state it as 2,120MB…

Bonus info.: How much database storage can you purchase to a Microsoft Dynamics C5 installation? Exactly 112,020MB. After this the Microsoft Dynamics C5 kernel will stop calculating the DB size and you will not be required to purchase extra database license (but you are not likely to ever reach this limit 🙂 ).

Note: To my knowledge all of this is also true for Microsoft XAL because it was build on the same kernal as Microsoft Dynamics C5

SUPER – but with no access to the role center?

Dynanmics 365 Business Central logo

So you think you are SUPER, but you are not able to log in to your Microsoft Dynamics 365 Business Center using the web client? (because of some access denied error).

Well… This is not a very common error, because these needs to be true to trigger it:

  • You are trying to login using the web client
  • Your installation is using a (partner) license with an expiration date, and the expiration dates is less than a month away (so you get a warning about it on every login (in web-, windows- and development-clients)
  • Your permissions are created specific on one or more companies only – so you don’t have i.e. BASIC without a company name

Just after entering your credentials, you’ll get the warning about the expiring license:

Caution: Your program license expires in 20 days.

…and as soon as you click OK you get this (sorry about the mixup of Danish and English here – maybe that is also a part of the bug? Translation is in the image description below):

Something went wrong. You don’t have permission to use the Role Center ‘SALES ORDER PROCESSOR’. Date and time: Fri, 01 Nov 2019 14:48:45 GMT. Go back home.

Your configuration is valid and works for the windows client, but unfortunately the web client have a bug preventing this from working.

This is a platform bug I’ve found in Microsoft Dynamics 365 Business Center 13 with CU 7 (i.e. BC13 CU7 which is the October 2018 release with cumulative update 7). I’ve NOT tested other versions, but I believe that it is also an issue in the latest CU for BC13 and possible also a bug in BC14 and BC15.

This bug HAS been reported to Microsoft and will be fixed in later CUs of the respective BC versions. It was assigned bug ID 332507.

Workarounds while waiting for the fixed cumulative update?

  • Use Windows client. It is not affected by this bug
  • You can add your permission sets without a company name. Maybe even create a new one that does not really grant you access to companies you should not have access to – or simply just add “BASIC”. As long as it is without company name the web client will work
  • Avoid using a license that is about to expire. Re-new your license

Note: When hit by this error, you will also see these event log entries on the server (sorry – also partly in Danish):

Server instance: xxxxxx
 Category: Security
 ClientSessionId: 5e339103-92dd-4ba3-b4cc-874531ba692b
 ClientActivityId: 1b071e5f-13c4-4352-9a3d-a7835ca50d9a
 ServerSessionUniqueId: 759dfb07-9b76-4eeb-bf7c-8a77cb0379d1
 ServerActivityId: 585927d0-5273-43b7-9c65-cdcc612115bd
 EventTime: 11/01/2019 14:47:44
 Message (NavPermissionException): RootException: NavPermissionException
 You do not have the following permissions on TableData Profile: Read.
 To view details about your permissions, see the Effective Permissions page. To report a problem, refer to the following server session ID: '85'.
 CallerStackTrace:
    at Microsoft.Dynamics.Nav.Runtime.PermissionSetBase.VerifyPermissions(NavApplicationObjectBase securableObject, PermissionMask permissionMask, LimitedUserPermissionChecker limitedUserPermissionChecker, Func2 checkTableEmpty, PermissionMask additionalIndirectPermissions, Boolean countAsLimitedUserAllowedTable)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.VerifyPermissions(PermissionMask permissionMask, Boolean checkForEmptyTable)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.IssueFindRequest(DataError errorLevel, Boolean reversed, FindType findType, Boolean useCache)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.FindFirstRecord(DataError errorLevel)    at Microsoft.Dynamics.Nav.Runtime.NavRecord.ALFindFirst(DataError errorLevel)    at Microsoft.Dynamics.Nav.Runtime.ProfileTableDataHandler.<GetAllItems>d__1.MoveNext()    at System.Linq.Enumerable.<ConcatIterator>d__591.MoveNext()
    at Microsoft.Dynamics.Nav.Runtime.EagerVirtualDataProvider.TryGetByPrimaryKey(RecordIdProviderRequest request, ReadOnlyRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.InternalTryGetByPrimaryKey(RecordIdCacheRequest request, MutableRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.TryHandleAsPrimaryKeyLookup(DataCacheRequest request, Boolean cacheOnly, MutableRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.InnerFind(FindCacheRequest request, Boolean fromPosition, Func`1 onlyCurrentKeyNeededForNextRow)
    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.IssueFindRequest(DataError errorLevel, Boolean reversed, FindType findType, Boolean useCache)
    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.FindFirstRecord(DataError errorLevel)
    at Microsoft.Dynamics.Nav.Runtime.NavRecord.ALFindFirst(DataError errorLevel)
    at Microsoft.Dynamics.Nav.XmlMetadata.NavConfigurationProfile.GetProfileRoleCenterId(NavProfileKey profile)
    at Microsoft.Dynamics.Nav.XmlMetadata.MetadataProvider.GetHomepageID(NavProfileKey profileKey)
    at Microsoft.Dynamics.Nav.XmlMetadata.MetadataProvider.GetNavigationFrame(Boolean applyPersonalization, NavProfileKey profileKey)
    at SyncInvokeGetNavigationFrame(Object , Object[] , Object[] )
    at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.RunInTransactionCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.TransientErrorRetryCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.ErrorMappingCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.PushPopCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationTracer.TraceScopeCombinator(Category telemetryCategory, ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass9_0.b__0()
    at Microsoft.Dynamics.Nav.Runtime.NavPerformanceCounterSetter.UpdatePerformanceCountersWithAverageServiceOperationDuration(Stopwatch stopWatch, Action action)
    at Microsoft.Dynamics.Nav.Runtime.NavPerformanceCounterSetter.UpdatePerformanceCountersWithAverageServiceOperationAction(Action action, NavSession session)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.PerformanceCounterCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.InitClientTelemetryIdsCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.TlsClearCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
    at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
    at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
    at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
    at System.ServiceModel.Dispatcher.MessageRpc.Wrapper.Resume(Boolean& alreadyResumedNoLock)
    at System.ServiceModel.Dispatcher.ThreadBehavior.ResumeProcessing(IResumeMessageRpc resume)
    at Microsoft.Dynamics.Nav.Runtime.NavSynchronizationContext.<>c__DisplayClass1_0.b__0(Object state)
    at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
    at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
    at System.Threading.ThreadPoolWorkQueue.Dispatch()
 ProcessId: 21660
 Tag: 00000XO
 ThreadId: 26
 CounterInformation: 
Der opstod fejl under forsøg på adgang til webstedet 
 Type: Microsoft.Dynamics.Nav.Types.NavPermissionException
 Message: You do not have the following permissions on TableData Profile: Read.
 To view details about your permissions, see the Effective Permissions page. To report a problem, refer to the following server session ID: '85'.
 StackTrace:
    ved Microsoft.Dynamics.Nav.Client.ConnectionStateManager.CallServer[T](BeginCallServerMethod beginCallServerMethod, EndCallServerMethod1 endCallServerMethod, ServerCallOptions options) i S:\Depot\Platform-Core\platform\client\Shared\Prod.Client.ServiceConnection\ConnectionStateManager.cs:linje 145    ved Microsoft.Dynamics.Nav.Client.ServiceConnection.CallServer[T](BeginCallServerMethod beginCallServerMethod, EndCallServerMethod1 endCallServerMethod) i S:\Depot\Platform-Core\platform\client\Shared\Prod.Client.ServiceConnection\ServiceConnection.cs:linje 2020
    ved Microsoft.Dynamics.Nav.Client.MetadataHandler.GetNavigationFrame(Boolean applyPersonalization, Boolean getNavigationFrameFromServer) i S:\Depot\Platform-Core\platform\client\Shared\Prod.Client.ServiceConnection\MetadataHandling\MetadataHandler.cs:linje 559
    ved Microsoft.Dynamics.Nav.Client.Web.NavWebBuilderSessionInitializer.NavigationServiceNavigationRootNeeded(Object sender, Object e) i S:\Depot\Platform-Core\platform\client\web\Prod.Client.WebCommon\NavBuilder\NavWebBuilderSessionInitializer.cs:linje 48
    ved Microsoft.Dynamics.Framework.UI.Web.ResponseManager.<>c__DisplayClass23_0.b__3() i S:\Depot\Platform-Core\platform\client\web\Prod.Client.Web\Callbacks\ResponseManager.cs:linje 175
    ved Microsoft.Dynamics.Framework.UI.LogicalOperationInvoker.<>c__DisplayClass21_0.b__0() i S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Threading\LogicalOperationInvoker\LogicalOperationInvoker.cs:linje 178
    ved Microsoft.Dynamics.Framework.UI.LogicalOperationInvoker.InvokeAndHandleExceptions(Func`1 action, IExceptionHandler exceptionHandler) i S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Threading\LogicalOperationInvoker\LogicalOperationInvoker.cs:linje 415
 Source: Microsoft.Dynamics.Nav.Client.ServiceConnection----------------------------------
 Type: Microsoft.Dynamics.Nav.Types.NavPermissionException
 Message: You do not have the following permissions on TableData Profile: Read.
 To view details about your permissions, see the Effective Permissions page. To report a problem, refer to the following server session ID: '85'.
 StackTrace:
    at Microsoft.Dynamics.Nav.Runtime.PermissionSetBase.VerifyPermissions(NavApplicationObjectBase securableObject, PermissionMask permissionMask, LimitedUserPermissionChecker limitedUserPermissionChecker, Func2 checkTableEmpty, PermissionMask additionalIndirectPermissions, Boolean countAsLimitedUserAllowedTable)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.VerifyPermissions(PermissionMask permissionMask, Boolean checkForEmptyTable)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.IssueFindRequest(DataError errorLevel, Boolean reversed, FindType findType, Boolean useCache)    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.FindFirstRecord(DataError errorLevel)    at Microsoft.Dynamics.Nav.Runtime.NavRecord.ALFindFirst(DataError errorLevel)    at Microsoft.Dynamics.Nav.Runtime.ProfileTableDataHandler.<GetAllItems>d__1.MoveNext()    at System.Linq.Enumerable.<ConcatIterator>d__591.MoveNext()
    at Microsoft.Dynamics.Nav.Runtime.EagerVirtualDataProvider.TryGetByPrimaryKey(RecordIdProviderRequest request, ReadOnlyRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.InternalTryGetByPrimaryKey(RecordIdCacheRequest request, MutableRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.TryHandleAsPrimaryKeyLookup(DataCacheRequest request, Boolean cacheOnly, MutableRecordBuffer& recordBuffer)
    at Microsoft.Dynamics.Nav.Runtime.DataAccess.InnerFind(FindCacheRequest request, Boolean fromPosition, Func`1 onlyCurrentKeyNeededForNextRow)
    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.IssueFindRequest(DataError errorLevel, Boolean reversed, FindType findType, Boolean useCache)
    at Microsoft.Dynamics.Nav.Runtime.RecordImplementation.FindFirstRecord(DataError errorLevel)
    at Microsoft.Dynamics.Nav.Runtime.NavRecord.ALFindFirst(DataError errorLevel)
    at Microsoft.Dynamics.Nav.XmlMetadata.NavConfigurationProfile.GetProfileRoleCenterId(NavProfileKey profile)
    at Microsoft.Dynamics.Nav.XmlMetadata.MetadataProvider.GetHomepageID(NavProfileKey profileKey)
    at Microsoft.Dynamics.Nav.XmlMetadata.MetadataProvider.GetNavigationFrame(Boolean applyPersonalization, NavProfileKey profileKey)
    at SyncInvokeGetNavigationFrame(Object , Object[] , Object[] )
    at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.RunInTransactionCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.TransientErrorRetryCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.<>c__DisplayClass24_1.b__1(NSServiceBase serviceInstance, Object[] inputs, Object[]& outputs)
    at Microsoft.Dynamics.Nav.Service.ServiceOperationInvoker.ErrorMappingCombinator(ServiceOperation innerOperation, NSServiceBase serviceInstance, MethodBase syncMethod, Object[] inputs, Object[]& outputs)
 Source: Microsoft.Dynamics.Nav.Ncl
Error accessing Website 
 Type: Microsoft.Dynamics.Nav.Types.NavProfileException
 Message: You don't have permission to use the Role Center 'ORDREBEHANDLER'.
 StackTrace:
    at Microsoft.Dynamics.Nav.Client.NavRunHomepagePropertyBagInvokedAction.Validate(FormPropertyBag queryParameters, UISession uiSession, Object invocationState) in S:\Depot\Platform-Core\platform\client\Shared\Prod.Client.UI\NavRunHomepagePropertyBagInvokedAction.cs:line 61
    at Microsoft.Dynamics.Framework.UI.LogicalFormActivator.GeneratePropertyBagCommand(FormPropertyBag propertyBagToUse, UISession uiSession, Object invocationState) in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\URL\LogicalFormActivator.cs:line 157
    at Microsoft.Dynamics.Framework.UI.LogicalFormActivator.ValidateAndInvokePropertyBag(FormPropertyBag propertyBagToUse, UISession uiSession, Object invocationState) in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\URL\LogicalFormActivator.cs:line 60
    at Microsoft.Dynamics.Framework.UI.OpenFormInteraction.InvokeCore(OpenFormInteractionInput logicalInteractionInput) in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Interactions\SystemInteractions\OpenFormInteraction.cs:line 0
    at Microsoft.Dynamics.Framework.UI.InteractionInvoker.Invoke[T](String interactionName, Action1 invokeMethod, T input) in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Interactions\InteractionInvoker.cs:line 42    at Microsoft.Dynamics.Framework.UI.LogicalInteraction1.Invoke(T logicalInteractionInput) in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Interactions\LogicalInteraction.cs:line 40
    at Microsoft.Dynamics.Framework.UI.InteractionManager.<>c__DisplayClass8_2.b__4() in S:\Depot\Platform-Core\platform\client\Shared\Prod.ClientFwk\Interactions\InteractionManager.cs:line 125
 Source: Microsoft.Dynamics.Nav.Client.UI